E-Mu MP-7 command station Operation Manual Addendum - page 21
XL-7 / MP-7 Manual Addendum 21
XL-7 / MP-7 Operation Manual Addendum
Record Multitrack Volume and Pan Information
You can record Volume and Pan information for all 16 channels simulta-
neously by using Volume Knob mode. You’ll be recording multichannel
volume or pan data onto a track. The default channel assignment will
rechannelize this data to a single channel. You must change this.
6.
Select a track for the Realtime Controller data.
7.
Press the Pattern Edit button and scroll to the “Channel Assign” page.
8.
Set the track to MultiA. Now the track will record multichannel data.
9.
Press the Pattern Edit button to exit the menu.
Automating the Volume of each Channel
10.
Select Volume knob mode by repeatedly pressing the Controller
Function Select button.
11.
Select Mix View mode if you wish to view the volume settings.
12.
Press the Stop button twice to make sure the pattern starts at the
beginning.
13.
Press the Record button in Pattern mode to get ready to realtime
record. The Play button LED will be flashing.
Use the “Erase cc#
Events” function to erase
controller data from the pattern.
14.
Press the Play button to begin recording. The controller knobs now
adjust the volumes of all 16 channels.
15.
Press Stop when you’re finished recording.
Real-time Panning
16.
Select Pan Knob mode by pressing the Controller Function Select
button.
17.
Select Mix View mode by pressing the Mix button (if it’s not already
selected).
18.
Turn the data entry control clockwise to select Ch Pan view.
19.
Press the Stop button twice to make sure the pattern starts at the
beginning.
20.
Press the Record button in Pattern mode to get ready to record. The
Play button LED will be flashing.
21.
Press the Play button to begin recording. The controller knobs now
adjust the pan positions of all 16 tracks.
22.
Press Stop when you’re finished recording.
Notes & Tips
The following are a couple of hidden tricks you might find useful.
• Press and hold Play, then press Record while a pattern is playing to
jump right into Grid Record mode.
• Selecting the next pattern while playing does NOT change the tempo.
This allows you to perform live pattern changes in one tempo. For a pat-
tern to play its own tempo, either press stop 3 times (loading the initial
setup data), or select the pattern while stopped.