Ea2 BL506 User Manual - page 8
ENGLISH 3
ENGLISH 4
2. Main Unit Appearance
3. Outdoor Thermo Sensor
Part A - LCD
A1: Projection Time
A2: Time Display
A3: Temperature Channel
A4: Temperature Trend
Part B - Buttons
B1: ”SNOOZE/ LIGHT” button
B2: “MODE/SET” button
B3: “ALARM” button
B4: “RESET” button
B5: “MAX/MIN” button
B6: “▲ 12/24" button
B7: "▼/ °C/°F” button
B8: “CHANNEL” button
B9: “PROJECTION ON/STANDBY” slide
switch
Part C - Structure
C1: Battery Cover
C2: Adaptor Jack (DC 4.5V)
C3: Stand
D1: Transmission Indication LED
D2: Wall Mount Hole
D3: Channel Select Switch
D4: “TX” button
D5: Battery Compartment
D6: Stand
4. Getting Started
4.1 Main Unit:
• Open main unit battery compartment cover [C1]
• Insert 2 x AAA batteries observing polarity [“ +” and “ –“ marks]
• Replace main unit battery compartment cover [C1]
• Use a pin to press the RESET [B4] button on the rear of the main unit, the main unit is
now ready for use
4.2 Outdoor Thermo Sensor
• Batteries compartment (D5) of thermo sensor is locating behind the back cover,
unscrews the batteries cover to open.
• Insert 2 x AAA batteries observing polarity [ “+” and “–“ marks]
5. Installation
5.1 Main Unit
Place the main unit onto flat surface (C3).
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note:Transmissions between receiver and transmitter can reach up to 30m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high
voltage lines, etc.