Ea2 BL506 User Manual - page 9
(3) Celsius / Fahrenheit
• Press “°C /°F” button (B7) to select Indoor/Outdoor Temperature in Celsius mode or
Fahrenheit mode.
• If the temperature is out of the measurable range, LL.L (beyond the minimum
temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD.
(4) Maximum / Minimum Temperature Recording Function:
• Press “MAX/MIN” button (B5) to see the maximum or minimum of IN/OUTDOOR
temperature.
“
” is shown on the LCD means the temperature shown is the recorded
max. temperature.
“
” is shown on the LCD means the temperature shown is the recorded
min. temperature.
• Hold “MAX/MIN” button (B5) for 3 seconds to clear the recorded maximum and
minimum reading.
7. Time and Alarm Setting
7.1 Manual Time Setting:
• Press “MODE/SET” button to select to view
Time
Date
• When viewing the time, hold “MODE/SET” button (B2) for 3 seconds to enter Clock/
Calendar setting mode.
• Press “▲” (B6) or “▼” (B7) button to adjust the setting and press “MODE/SET” button
(B2) button to confirm each setting.
• The setting sequence is shown as follow: Hour, Minute, Year, Month/Day sequence,
Month, Day, and Time Zone.
Note:
(1) For Time Zone: If you receive no RC-DCF frequency signal, the time zone should be
set to 0. Time Zone is used in countries which can received the DCF frequency signal
but the time zone is different from German Time ( i.e. GMT+1).
(2) The Time Setting Mode will automatically exit in 15 seconds without any adjustment.
7.2 12/24 Hour Display mode:
Press “(12/24)” button (B6) to select 12 or 24 hours mode.
Display the indoor & three
channels alternatively
Indicating the temp. is rising
Indicating the temp. is steady
Indicating the temp. is falling
ENGLISH 5
ENGLISH 6
6. Thermometer
6.1 RF Transmission Procedure:
• The main unit automatically starts receiving transmission from outdoor thermo sensor
for outdoor temperature after batteries are inserted.
• The thermo sensor unit will automatically transmit temperature signal to the main unit
after batteries inserted.
• For having more than one external transmitter (Maximum3), select the Channel, CH1,
CH2 or CH3 to ensure each sensor is transmitting difference channel before inserting
batteries. The channel select switch (D3) is at the back of the thermo sensor.
• Press “TX “button (D4) on the thermo sensor unit to transmit temperatures signal to
the weather station manually. The weather station gives a “beep” sound if it received
the temperature.
Note: Buttons (except “Light” button (B1)) will not function while scanning for thermo
sensor’s signal unless they are well received or stopped manually.
6.2 Temperature:
(1) Temperature--- Channel Selection
• Press “CHANNEL” button (B8) and select to view the Indoor temperature and 3
Outdoor Channel’s temperature. The sequence is shown as follow:
• When viewing outdoor temperature, hold “CHANNEL” button (B8) for 3 seconds to
remove a channel manually. It will automatically register a new channel again if a new
channel is received. If there is no temperature displayed in existing channel (“- - . –“is
displayed on the LCD), hold “CHANNEL” button (B8) for 3 seconds to cancel that
channel and receive the channel again.
(2) Temperature Trend
• The trend pointer (A4) displayed on the LCD indicates the trend of the temperature for
current channel (Indoor, Outdoor CH1, CH2 and CH3).
PRESS “CHANNEL” button and select to view