Easy-Kleen AS152E Alternate Spec Owner's manual - Introduction
8
Cold Water Electric • Rev.
17/10/2016
Firehouse & Car Detailing Series
MODEL
GPM
PSI
DRIVE
HP
VOLTAGE
FD2040E
4
2000
DIRECT DRIVE
5
230V-1PH
FD3035E-GP
3.5
3000
DIRECT DRIVE
7.5
230V-1PH
FD2435E-GP
3.5
2400
DIRECT DRIVE
5
230V-1PH
Marine Series
Electric
MODEL
GPM
PSI
DRIVE
HP
VOLTAGE
ES204E-A
4
2000
FLANGE & COUPLING
5
220/1PH
ES204E-A-3
4
2000
FLANGE & COUPLING
5
230/440/575V 3PH
ES304E-A
4
3000
FLANGE & COUPLING
7.5
220/1PH
ES304E-A-3
4
3000
FLANGE & COUPLING
7.5
230/440/575V 3PH
ES404-A
4
4000
FLANGE & COUPLING
10
220/1PH
ES404-A-3
4
4000
FLANGE & COUPLING
10
230/440/575V 3PH
INTRODUCTION
Thank you for selecting a quality Easy-Kleen product. We are pleased to have you included
among the many satisfied owners of Easy-Kleen cleaning machines. Years of engineering
have gone into the development of these fine products and only top quality components and
materials are used throughout. Each machine is carefully tested and inspected before leaving
our plant to ensure years of dependable performance.
To continue to receive satisfactory performance, remembering that this machine represents a
substantial investment on your part, and if properly cared for and maintained it will return this
investment many times over. As with all mechanical equipment, your machine requires proper
operation and maintenance as outlined in this manual for maximum trouble free life.
This manual has been prepared under the direction of our engineering and service technicians.
Their experience in designing, manufacturing, installing and servicing our equipment from our
company’s inception is condensed in this manual. They know what information the end user
needs in order to get the optimum performance from their pressure washer. Please read
carefully.
This manual contains information that will be specific for your pressure washer, as well as
similar models.
Carefully review any additional manuals that have been included with your system and
follow ALL ADDITIONAL OPERATING INSTRUCTIONS AND SAFETY NOTICES.
They are specific for the quality components that have been used to manufacture your
machine and are an integral part of the operating and maintenance procedures.