Easymount Cold EM-1400 Product Instruction Manual - page 7
7
Film Loading
Pressure sensitive film (loaded on the top mandrel)
1. Lift the feed tray to the upright
position and lock securely. Following
the loading diagram on the left
cabinet of the machine, pull the film
off the bottom of the mandrel and
towards the front of the machine,
over the top of the upper roller
3. Drape the film over the upper roller
and stick the liner paper to the take
up mandrel using double sided tape
2. Peel back the liner paper from the
film, exposing the adhesive side of
the laminate and stick release liner to
take up mandrel using double sided
tape
1. Following the loading diagram
feed the paper up over the lower
roller and stick it to the adhesive side
of the pressure sensitive film
5. Press the drive button and feed
through. PLEASE NOTE When the
board is through the rollers the
pressure handle will need to be
adjusted to compensate for thickness
2. Using the pressure handle raise the
upper roller
3. Using a piece of stiff card or mount
board push the overlapped films into
the nip of the roller
4. Using the roller pressure handle
lower the upper roller so it clamps
the material
Liner Paper (Load on the Bottom Mandrel)
(Safety guard lock)