Eberspächer B1LC compact Operating Instructions Manual - page 15
Wiring diagram heater, version ADR / TRS 003 / TMD
T ~ r r m ~ n r r r T T i ~ T i
1 2 3 4 5 6 7 8 9 10 !! 12 13 14
Parts list
GD
1.1
Burner motor
1.2
Glow plug
1.5
Overheating sensor
1.12
Flame sensor
2.1
Controller
2.2
Dosing pump
2.7
Main fuse
12 volt = 25 A; 24 volt = 15 A
2.7.1
Fuse, actuation 5 A
4.5.1
Diode TRS
5.1
Battery
5.2.1
Battery operating switch d)
(operation e.g. controlled via
ignition lock)
Cable colours
sw =
black
ws -
white
rt =
red
ge -
yellow
gn =
green
V!
-
violet
br =
brown
gr =
grey
bl -
blew
li
=
purple
a)
Emergency-shutclown function in
the case of ADR / TRS 003 / TMD -
item 5 .2 .2 -5 .5
5.2.2 Battery separating switch d)
5.3
Accessory drive HA+
5.3.1 Switch auxiliary drive
5.5
Generator D+
Connect the control elements and
external sensors according to the
“Control Elements" circuit diagram
• rt
Supply plus terminal 30
• ge
Switch-on signal S+
• gr
Temperature - actual value
• wsrt Switch off theft warning
system; Feedback to ADR /
TRS 003 / TMD switch clock
• br
Supply minus terminal 31
• blws Diagnosis
• grrt Temperature - target value
• brws Sensor reference signal
b) Optional
•
Fresh-air blower
and / or
. • Vehicle fan control
25 1976 00 96 02 B
c) Wiring if operated subject to ADR /
TRS 003 / TMD (transporters
carrying dangerous substances in
the utility vehicle sector, e.g. road
tanker)
d) If only one control element is used
for items 5.2.1 and 5.2.2, it must be
ensured that, if the function
opening of battery separating
switch’ is actuated (emergency
shutdown-function in the case of
ADR, TRS 003, TMD and similar),
the switch always breaks contact
without delay (without
consideration for the heater mode)
and breaks all of the heater’s
circuits from the battery.
14