Eberspächer B3LC User Manual - page 12
12
Installation
3
Installation location
Installation in a car or people carrier
In a car or people carrier, the heater is preferably
installed in the passenger compartment or boot.
If it is not possible to install the heater in the
passenger compartment or boot, the heater can also
be mounted under the vehicle floor.
Heater in front of the passenger seat
Heater between the driver’s seat and the
passenger seat
Heater under the vehicle floor
Heater under the back seat
Heater in the boot
Installation in a truck
In a truck, the heater is preferably installed inside the
driver’s cab.
If it is not possible to install the heater inside the
driver’s cab, it can also be mounted in the tool box or
in a storage box.
Installation in an excavator cab
In an excavator, the heater is preferably installed in
the cab.
If it is not possible to install the heater in the cab, the
heater can also be installed in a storage box outside
the cab.
Heater in the passenger’s foot room
Heater on the cab rear wall
Heater under the bed
Heater in the tool box
Heater in the seat box
Heater on the cab rear wall
Heater in the safety housing
• The installation suggestions made in the installation
instructions are just examples. Other installation
locations are possible, as long as they correspond
to the installation requirements stated in these
instructions.
• Other installation information (e. g. for boats and
ships) is available from the manufacturer on request.
• Observe the tolerable installation position together
with the operating and storage temperatures.
Please note!