Eberspächer B3LC User Manual - page 13
of
34
13
Installation
3
Possible installation positions
The heater is preferably installed in the normal
position as shown in the drawing.
Depending on the installation conditions, the heater
can be tilted by max. 30° (flow direction to the
bottom) or turned by max. 90° around its own
longitudinal axis (exhaust connection horizontal, glow
plug points upwards!).
Normal position horizontal (exhaust connection
downwards) with tolerable swivel range
Heater air intake opening (fan wheel)
Position of the glow plug
Direction of flow
In the heating mode, the heater can deviate from the
shown normal or maximum installation positions by up
to +15° in all directions because of a slanting position
of the vehicle or boat, without any impaired functions.