Eberspächer EasyStart Select Installation Instructions Manual - page 11
VEhICLE hEATERs – TEChnICAL DOCuMEnTATIOn | 11
selecting the settings fOr the stand-
ard cOnfiguratiOn
sELECTIng ThE TEMpERATuRE unITs – ITEM
2:
Default: °C
use the
or
button to select Item 2:
and confirm by pressing the
button.
use the
or
button to select the tem-
perature units °C or °F.
use the
button to confirm the selection,
then select the next setting or exit the Work-
shop menu with a LOngpREss on the
button or via timeout.
ChAngIng ThE pREsET OpERATIng TIME –
ITEM 4:
Default: Water heater = 30 min. / Air heater =
continuous heating mode
use the
or
button to select Item 4:
and confirm by pressing the
button.
Display for water heaters:
Operating time is 60 minutes.
Display for air heaters:
Operating time limitation OFF. Continuous
operation is set.
use the
or
button to set the operat-
ing time.
Operating time setting range:
10 – 120 min. in 1 min. increments, continu-
ous heating mode is possible for air heaters.
From the 120th min. the operating time can
be extended in 5 min. increments up to 720
min.
use the
button to confirm the selec-
tion, e.g. operating time 90 min., then select
the next setting or exit the Workshop menu
with a LOngpREss on the
button or via
timeout.
3 sTARTup / COnFIguRATIOn