EBS T200 User Manual - page 16
T200 Terminal User’s Manual
16
_____________________________________________________
20080129#1.0
The settings of the
Auto save
function are used to save every modification to the project parameters.
In order to prepare a text for printing, you need to perform the following operations (the numbering of
successive operations corresponds to that shown in
n
- Select the
Edit text
button on the
Root Menu
screen,
o
- Prepare the text for printing following the description given in section
the text in question is as follows:
Simple text typed in via
keypad; a capital “D” and
character “:” are available
after the
button has been
pressed.
Components the Univ.
date and time
variable
field are available when
the button and then
the
button are
pressed.
p
- Go to auxiliary menu by pressing the button,
q
- If you wish to pre-print the text in question, select the
Print it
item. The text is sent to printer and
then it is printed but not saved in the printer memory.
r
- In order to save the project, select the
Save project
item. If the project has not been saved
before, you are prompted to give its name. Once you type it in, the name appears on the title bar,
s
,
automatically. The same name is also given to the text file in text file library,
u
.
t
- Set the printer parameters that apply to the text you are editing. You can move easily among the
text editor,
s
, parameter edit window for a given text file,
t
, and text file library,
u
, thanks to
simplified navigation via icons on the title bar.
NOTE:
You can edit the contents,
s
, and parameters,
t
, of a text file which is highlighted in the library at
a given moment. In order to move to another text or its parameters (or create a new one), you
should select another item (from 1 to 30) from the library.
On finishing editing send the text file to printer. In order to do that, select the
Send/retrieve
button
from the
Connect
menu,
u
. When you do that, menu
v
is displayed on the terminal. Then press the
Send project(s)
button. The terminal display shows the question whether the active project (currently
highlighted in the library) or all projects stored in the library should be sent. In the example in question
it is enough to send the active project. Since then the text file together with its associated parameters
is in the printer memory.
Start printing the text. In order to do that, move to the
Root Menu
screen (via the
button available
on the title bar).
n
o
p
q
Fig. 6.15