EBS T200 User Manual - 1. Application
T200 Terminal User’s Manual
4
_____________________________________________________
20080129#1.0
1. Application
The
T200 terminal is a stationary device designed for controlling EBS-230 printers. It can
replace a PC in operating the printers, which is advantageous, especially in the places where the
application of a PC is impossible or hindered. With the terminal, a user can change the printer
parameters, edit text files, send the files to the printer and also start or stop printing. Owing to the
application of a touch pad, the device can be operated intuitively and with ease.
This document contains information about the terminal only and supplements the
EBS-230
Printer User’s Manual
.
2. Safety Requirements
There are no dangerous voltages or other hazards in the device. For this reason the conditions for
safe use of the
T200 terminal do not exceed the safety requirements described in
EBS-230
Printer User’s Manual
.
3. Conformity Marking
The
EBS-230 printer has been subjected to conformity assessment procedure, which ended with
the issue of Declaration of Conformity. The Declaration forms the basis for the statement that the
EBS-230 printer together with the manufacturer equipment, to which the Declarations also
applies, meets the requirements of the following European Community Directives, provided that the
printer and equipment are installed and used in compliance with the manufacturer’s instructions:
2006/95/EEC
, 89/336/EEC, 91/263/EEC, 92/31/EEC, 93/68/EEC
and meet the following norms, which are harmonised with the above directives:
EN 61000-6-2:2001,
EN 61000-6-4:2001,
EN 60950-1:2001
On this basis, the following marking has been placed on the
EBS-230 printer and T200
terminal since 2007:
4. Environmental Protection
T200 terminal working in the EBS-230 printing system is not subject to Directive
2002/96/EC
of the European Parliament and of the Council on waste electrical and
electronic equipment (WEEE). However, following the European Community’s generally
accepted policy on environmental protection, we recommend that after the
T200 terminal
has been put out of service, it should be separated from municipal waste and processed in
an environmentally friendly way according to the applicable local regulations.
5. Installation
The
T200 terminal is supplied as a self-
contained device in combination with a holder.
The cabling needed to link it to the system is
available in
R230 cable distributor.