EBS T200 User Manual - 7. Advanced Information
T200 Terminal User’s Manual
20080129#1.0
_____________________________________________________
17
On the
Root Menu
screen, select button
n
(see
Printer control
screen (
o
) appears
on the terminal display. If the information (status and ink level) displayed in that window is correct,
select the text (
p
) which you wish to print from the drop-down menu, and then press the
Start
printing
button (
q
). The printer moves to the print state and awaits a signal from the photo-detector
to start printing.
In order to suppress printing, press the
Stop printing
button in the
Printer control
window.
7. Advanced Information
Safe Mode
The Safe Mode allows a user to start the terminal using default settings. The feature can be useful,
when, for example, any of the terminal settings makes operation impossible or hindered (for example,
due to improper calibration). As all user settings (including passwords) are deleted when the user
enters the Safe Mode, access to the mode is protected. In order to avoid entering the mode
accidentally, the Safe Mode button must be pressed three times. The position of the button on the
display changes each time the button is pressed (left bottom corner,
n
→ right bottom corner,
o
→
left top corner,
p
). The button needs to be pressed successively three times within 3 seconds.
Otherwise the device switches on in the regular mode and displays the root menu,
s
. After the Safe
Mode
button has been pressed three times, the safe mode window,
q
, is displayed, prompting a user
to type in a four-figure password (via the numerical keypad,
r
). If the password is correct, the terminal
displayed the
Set terminal settings
window. However, if the user does not know the password or
would like to start the device in the regular mode, it is enough to leave the password box empty and
press the OK button.
Button not
pressed for
3 seconds
n
o
p
q
r
s
Button not
pressed for
3 seconds
Button not
pressed for
3 seconds
Fig. 7.1