Echo QV-8000 Instruction Manual - Transporting System
Other manuals for QV-8000:
Operator's Manual
Manual is about: Chain Saw
of
30
12
QV-8000 TYPE1-E
Transporting system
CAUTION
Follow fire department procedures for
transporting power equipment.
Transport system to cutting area with blade to rear.
Stopping
• Release throttle trigger and move ignition switch
down to “STOP” position.
STOP
Ignition switch
Throttle trigger
OPERATION (Pre-Ventilation Procedures)
NOTE
If engine does not stop, pull choke control knob
out fully to stop engine.
Return the unit to your authorized ECHO dealer
to check and repair stop switch before starting
the engine again.