Echo QV-8000 Instruction Manual - Maintenance
Other manuals for QV-8000:
Operator's Manual
Manual is about: Chain Saw
of
30
21
QV-8000 TYPE1-E
MAINTENANCE
Chain lubricant
Proper lubrication of the chain while in operation
reduces the friction to a minimum between the
chain and the guide bar, and assures faster cutting
and longer bar and chain life.
• The QuikVent™ system should be used only with
special ECHO detergent bar and chain oil.
Refer to page 26 for accessory part number.
• When refilling fuel mixture, fill up chain oil at the
same time.
Adjusting knob
Decrease
Increase
Oil tank cap
Refill chain oil tank
(After Each Use)
1. Remove oil tank cap.
2. Add oil : ECHO high detergent oil.
3. Install oil tank cap.
Adjust automatic oiler
(As Needed)
Turn automatic oiler clockwise to increase oil output
or counterclockwise to decrease output.
NOTE
If chain runs dry of oil during operation, it is most
likely due to a misadjusted automatic oiler.