Echo QV-8000 Instruction Manual - Use Correct Technique
6
QV-8000 TYPE1-E
Use correct technique
SAFETY
DANGER
Grasp both handles firmly and bring the saw
to full throttle. Using a steady pressure, rock
the tip of the saw into the roof surface, using
the skid plate as a pivot point between the
system and the roof. Keeping the weight of
the system against the roof with a firm grip
will increase operator comfort and control
during this dangerous operation.
1. With a basic understanding of kickback, you
can reduce or eliminate the element of surprise.
Sudden surprise contributes to accidents.
2. Keep a good firm grip of the saw with both
hands, the right hand on the rear handle, and
the left hand on the front handle. When the
engine is running, use a firm grip with thumbs
and fingers encircling the chain saw handles. A
firm grip will help you reduce kickback and
maintain control of the saw. Do not let go.
3. Always work upwind.
4. Cut at high engine speeds.
5. Ventilation and breaching use “plunge cutting”
which entails boring into a structure. There is
always a chance of kickback even when the
plunge cut is expertly done.
6. Keep the skid plate touching the cutting
surface.
7. Avoid cutting joists.
8. Do not overreach or cut above shoulder height.
9. Follow manufacturer’s sharpening and
maintenance instructions for the saw chain.
10. Use only replacement bars and chains
specified by ECHO, Inc.