Eclipse ES-V600 User Manual - page 17
16
“DOOR NUM” setting can support maximum 2 doorbell channels for surveillance. With one doorbell only, you only
need to set “DOOR NUM 1”. For two doorbells you need to set “DOOR NUM 2” to activate both 2 doorbell cameras.
E.g. Press “◄►” button to modify number.
Press “Image capture” button for 2 seconds to return to the first menu interface, then double click “off” button to
turn off the screen and save the setting.
CCTV NUM: CCTV surveillance channel number function
:
“CCTV NUM” means 4 cameras surveillance image setting, if you don’t need to monitor any camera image, set “CCTV
NUM” as “0”. Press “◄►” button to modify number. The number showed on the screen is the total surveillance
number. E.g. means 4 video channel has been activated.
Press “Image capture” button for 2 seconds to return to the first menu interface, then double click “off” button to
turn off the screen and save the setting.
CHIME VOLUME SET : Chime Volume adjustment
In standby mode, press “Answer /Monitor” button for 6 seconds, the blue screen will show the default chime mode.
Press “◄►” button to adjust the chime volume. When the mute function is on, a red LED will light on the monitor
and the screen displays the word “mute”.
If there is a call from doorbell camera or other indoor monitor, the receiving monitor remains mute. However, the
broadcasting function still works when the mute function activated. Press “off” button to turn off the screen, or it will
be turned off automatically after 5 seconds without pressing any button.
TALK VOLUME SET: Talk Volume adjustment
In standby mode, press “Answer /Monitor” button for 6 seconds. The blue screen will display the current talk volume.
Keep pressing this button to adjust the talk volume. E.g. Like figure below:
CHIME VOL
:Ringing volume
TALK VOL
:Call volume
EXT-AUDIO VOL: Extension-Audio Volume
DEFAULT SET
:Recover Ex-factory setting
At this mode, with the current setting flashing, press “Image capture” button to move adjustment from chime to the
talk-setting. The defaulted talk volume is ”HIGH”. Press “◄►” button to adjust. If talk volume “LOW’ is selected, a
green light will be on. Press “off” button to save and turn off the screen, or it will turn off automatically after 5 seconds
without pressing any buttons.