Eclipse ES-V600 User Manual - Function Guide
17
Brightness/Contrast/Color:
At standby mode, press “Answer /Monitor” button to display an image, press“◄►” button to adjust the
Brightness/Contrast/Color for the image. At monitoring mode, press “◄►” button to adjust Brightness. Press
“Image capture” button to move between Brightness, Contrast, Color Settings.
Function Guide
Call & Unlock Function
When a visitor calls from the doorbell/camera, the visitor’s image shows on the monitor screen. Press “Answer
/Monitor” button to stop the chime.
1) You now have 60 seconds default talking time.
2)
During the 60 seconds talking period, you can decide to release the door or not for this
visitor.
Press and hold the “Unlock” key. The shortest unlock time is 1sec. The Green/Red Indicator will be on when
the door is releasing. (Green Light for the Doorbell/Camera1. Red light for the Doorbell/Camera 2.) Door can only be
released at answering mode. The door can not be released at any other mode for security reasons. (e.g. accidental
pressing).
Intercom Function
In standby mode, press “Call transfer” button to initiate a transfer. The receiving monitors will chime until any
monitor answers by pressing “Answer /Monitor” button.
Call Transfer Function
1) Direct Transfer:
To transfer the call to other monitors:
Press “Call transfer” button on the monitor. All other monitors in the system will receive your call transferring
message. Anyone can press the “Answer /Monitor” button on any other unit to talk with the visitor.
2 ) Broadcasting transfer
When you answer the call, press “Call transfer” button and hold. The word “mute” will appear. During this time
you may get a chance to ask another person if he/she would like to answer the visitor. Press “Call transfer”
button again to get into the communication mode.
Broadcasting Function
In standby mode, press and hold “Call transfer” button for 2 seconds on any monitors to activate the broadcasting
function, once the broadcasting function is activated, you can talk to all other indoor monitors.
Monitoring function:
Press and hold “Monitor” (BUTTON 1) on any monitor will view the outside images from the Doorbell/Camera. Green &
Red lights will display for Camera 1 or 2 respectively. The default monitoring time is 30sec. When monitor extension 4