ECO Charge FS3 Operator/installer Manual - 10. Operating Instructions
Manual is about: Modular charger XHF Series
of
29
10. Operating Instructions
Operating Instructions
Set the rocker switch to
START.
8
7
1
2
3
4
5
Connect the battery to the charger using the correct cable.
Check the voltage, amphr and battery type indicated on the
charger’s display matches the battery to be charged.
Plug the charger in and turn on the AC supply.
Set the rocker switch to
STOP.
Check the battery leads are in good condition before proceeding.
The red
CHARGING light will illuminate
to indicate charging has commenced.
When the green
READY light illuminates, charging is complete.
9
Set the rocker switch to
STOP and then
disconnect the battery from the charger.
6