ECO Charge FS3 Operator/installer Manual - 12. Front Panel

12. Front Panel

Front Panel

When a Non-Urgent Alarm is indicated the charge cycle has still 

completed and in most cases can be disregarded.

When an Urgent Alarm is indicated, the charge cycle has not been 

completed and the occurrence must be reported to a Supervisor

, 

your servicing battery dealer or DC Power Technologies at 

844-ECO-CHRG.

Controller display.

Displays information depending on the status of the charger.

1

4

START/STOP rocker switch.

0 = Stop charge.

I = Start charge.

5

READY/CHARGING indicator lights.

RED steady on, GREEN off = Charging.

RED off, GREEN steady on = Charge complete.

RED flashing, GREEN off = Non-Urgent Alarm.

RED flashing, GREEN flashing = Urgent Alarm.

3

Mini USB port.

2

Controller push buttons (Set Equalize Charge).

To enable equalize next cycle, plug in the battery 

but before setting the rocker switch to 

START:

- Press   button to set equalize next cycle.

- Press ENTER to allow changing.

- Press   to select “Enable”.

- Press ENTER to accept change.

- Press   to select “Store”.

- Press ENTER to accept.

- Press   to return to “Connect Battery”.

- Set the rocker switch to 

START.