Ecom i.roc Ci70-Ex Manual - page 6
10
11
About the Status LEDs
Use the following illustrations and table to understand the status LEDs on your com-
puter All six status LEDS are not available on every i roc
®
Ci70 -Ex computer For ex-
ample, the QWERTY versions of the i roc
®
Ci70 -Ex do not have a green key status LED
Location of the i.roc
®
Ci70 -Ex Status LEDs
Green key
status LED
Shift key
status LED
Orange key
status LED
Battery status LED
Notification LED
Good Read and Ready-to-Work
Status LED
Status LED Descriptions
LED
Color
Description
Notification
Amber
This LED is user-programmable
Good Read
Green
The computer successfully decoded a bar code
Ready-to-Work
Blue
If you have Intermec Terminal Emulator (ITE), the application is running
and connected to the host
If you do not have ITE, you can configure the Ready-to-Work indicator to
turn on or off to indicate a healthy state
Blinking
blue
ITE is running but not connected to the host
The computer is unhealthy
Off
ITE is not installed or not running
The computer is healthy
Battery
See “About Battery Status” on page 12
Key Status
Green
The Green function key is enabled
Orange
The Orange function key is enabled
Shift
Red
The Shift key is enabled
About Language Provisioning
If your i roc® Ci70 -Ex computer includes language provisioning, you are prompted to
select a language provision when the computer starts for the first time. It may take up
to 15 minutes to load your language
Make sure you select the correct language before you tap Provision If you need to have
the language provisioning changed, you will need to send your computer to an ecom
instruments Global Repair Center
About the Battery
L
The computer uses following rechargeable Lithium-ion battery pack as the main power
source:
• 3.7 V, 4000 mAH (14.8 Wh) battery AM Ci70 -Ex
L
The battery used in this device may present a fire or chemical burn hazard if it is mis-
treated Do not disassemble it, heat it above 60 °C (140 °F) or incinerate it Dispose of
used batteries promptly Keep away from children
Charge the Battery
You need to fully charge the battery before using your computer for the first time.
Change the Battery
If your battery power is low, you need to either charge the battery in the computer, or
replace it with a charged battery
1 Save your files and close any open applications.
2 Press the Power button and choose Shutdown from the menu to shut down
the computer
3 Detach the handstrap from the computer
Detaching the Handstrap from an i.roc
®
Ci70 -Ex
4 Make sure the computer is in standby mode and that the screen has turned off
5 Remove the battery
Unscrew the battery‘s screw using enclosed screwdriver Lift lower part of the
battery to release it from the computer