Ecom i.roc Ci70-Ex Manual - page 9
16
17
Note:
The Real Time Clock (RTC) will persist through all of the power options as long as it
receives power from the Real Time Clock battery
Intermec Power Options
Option
Description
Suspend
Medium power saving mode The computer powers off all radios
and internal devices not involved in saving the system state, but the
phone stays on to receive calls This option is the default setting
You can wake the computer by pressing the Power button, pulling
the scanner trigger, receiving a call, scheduling an event such as
an alarm, or by connecting external power
Reboot
The computer does not save the current system state, but the
registry and file systems are saved. The computer shuts down all
running processes and restarts
Cancel
The Power Options menu is cancelled
Screen Off
Lowest power saving mode The screen turns off, but the phone,
all radios, and internal devices stay on Tap the screen to turn the
screen back on
Shutdown
Very high power saving mode The computer turns off everything
You must press Power or apply external power to restart the com-
puter
The Power Options screen is customizable You can use Intermec Settings to determine
which options are available to end users, the timeout until the default choice is selected,
the default action if no option is selected, or to disable the Power Options screen For
more information on customizing the screen using Intermec Settings, see “Use In-
termec Settings on the Computer” or see the Intermec Settings Command Reference
Manual
About the Intermec Dashboard Button
If the Ready-to-Work light blinks, your computer may be experiencing a problem Press
the Intermec Dashboard button (m) to launch the Intermec Dashboard application and
view troubleshooting and status information
You can press the m button at any time to bring up the Intermec Dashboard If the
computer is not healthy, the current issues are displayed at the top of the screen If
the device is healthy, you can use the Dashboard to view device information For more
information, see “About the Intermec Dashboard”
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight inten-
sity to conserve power and ensure the display is readable By default, the screen turns
off when there is no activity with the computer Press a key or tap the screen to resume
activity
You can configure the screen backlight to turn off.
1 Tap Start > Settings > Power
2 Tap Advanced on the horizontal scroll bar
3 Select the screen power off settings for when the computer is on battery
power or external power
You can configure the screen brightness using Intermec Settings or from the Start
menu
1 Tap Start > Settings > System > Backlight
2 Adjust the slider to the desired brightness level
3 Tap OK
Adjust the Volume
You can adjust the computer volume for your needs and your environment The volume
includes sounds you hear when you tap the screen or read bar codes with the imager
You can set the volume to off, very low, low, medium, high or very high (default)
You can also use the buttons on the right side of the computer to adjust the volume:
• The upper button increases the volume.
• The lower button decreases the volume.
You can adjust the volume settings using Intermec Settings or the horizontal scroll
menu
1 Tap the Volume icon at the top of the screen, and then tap the volume icon on the
horizontal scroll menu
2 Use your stylus or the u and d keys to adjust the volume slider to the volume you
want, or select Off
Insert a microSD Card
You can use a microSD card to increase file storage and install software.
The computer supports an optional 32 GB maximum capacity microSD card
Note:
The computer resets when you open the card access door to insert the microSD card
Make sure you completely close the card access door before you use your computer
ecom instruments recommends using the following microSD cards:
Card Type
Card Size
ecom Part Number
ATP Industrial Grade microSD card
1 GB
A0003477
ATP Industrial Grade microSD card
2 GB
A0003478
ATP Industrial Grade microSD card
4 GB
A0030305
ATP Industrial Grade microSD card
8 GB
A0030306
Install a microSD card in a i.roc
®
Ci70 -Ex
1 Press the Power button to turn off the computer
2 Remove the handstrap and the battery
3 Remove the four Phillips screws and open the card access door