EcoNet RETST601SYS Users Manual & Installation - 72°
Status
Settings
inside
Service
Heat
Mode
Wed.
Jan. 1
6:00
am
outside
72°
55º
heat
cool
74
°
Status
Settings
inside
Service
Heat
Mode
Wed.
Jan. 1
6:00
am
outside
72°
80º
heat
cool
70
°
Status
Settings
inside
Service
FanOnly
Mode
Wed.
Jan. 1
6:00
am
outside
72°
55º
fan speed adjust
off
9
8
9
8
MAIN SCREEN
| PANTALLA PRINCIPAL | ÉCRAN PRINCIPAL
Heating/Cooling Set Temp
Configuración de temperatura de calefacción/enfriamiento
Temp. fixée de chauffage/refroidissement
Press the up/down arrows next to the set temp. If Auto mode is selected, press the Heat
or Cool tab above the set temperature to toggle between the heating and cooling set
temperature. The degree symbol next to the set temperature will blink when the system is
running the heating/cooling equipment.
Presiona las flechas hacia arriba o hacia abajo para configurar la temperatura. Si el modo
Auto está seleccionado, presiona la pestaña Heat o Cool sobre la temperatura determinada
para cambiar entre las temperaturas de calefacción y enfriamiento. El símbolo de grados
junto a la temperatura establecida parpadeará cuando el sistema ponga en funcionamiento el
equipo de calefacción o enfriamiento.
Appuyez sur la flèche ascendante/descendante à côté de la temp. fixée. Si le mode Auto
est choisi, appuyez sur la touche Heat (chauffage) ou Cool (climatisation) au-dessus de
la température fixée pour alterner entre les températures de chauffage ou climatisation
fixées. Le symbole de degré à côté de la température fixée clignotera lorsque le système fait
fonctionner l’équipement de chauffage/climatisation.
MAIN SCREEN
| PANTALLA PRINCIPAL | ÉCRAN PRINCIPAL
Fan Only Setting
Configuración sólo ventilador
Réglage de ventilateur uniquement
Press the mode icon to select Fan Only, then press the up/down buttons to select fan speed.
Six settings are available, Off and five fan speeds. While in Fan Only mode, the heating/
cooling equipment is turned off. Press the mode icon again to reactivate heating or cooling
mode. If a schedule is running, the fan speed will return to the scheduled fan speed.
Presiona el ícono de modalidad para seleccionar Sólo ventilador, y luego presiona los botones
hacia arriba o hacia abajo para seleccionar la velocidad del ventilador. Hay seis opciones de
configuración disponibles: Apagado y cinco velocidades de ventilador. En la modalidad Sólo
ventilador se apaga el equipo de calefacción o enfriamiento. Presiona de nuevo el ícono de
modalidad para reactivar la modalidad de calefacción o enfriamiento. Si está funcionando
una programación, la velocidad del ventilador regresará a lo programado.
Appuyez sur l’icône Mode pour choisir Fan Only (ventilateur seulement), puis appuyez
sur les boutons ascendant/descendant pour sélectionner la vitesse du ventilateur. Vous
disposez de six réglages, arrêt et cinq vitesses de ventilateur. En mode Ventilateur seulement,
l’équipement de chauffage/climatisation est éteint. Appuyez à nouveau sur l
ֹ
’icône Mode pour
remettre le mode de chauffage ou climatisation en marche. Si un horaire programmé est en
cours d’exécution, la vitesse du ventilateur se remettra à la vitesse prévue
du ventilateur.