ECopy 3323B001 - imageFORMULA ScanFront 220e Administrator's Manual - Select The File Name Tab.
eCopy Connector for Quick Connect Administrator’s Guide | 17
To define file naming fields:
1
Select the File Name tab.
2
Click New.
3
Use the Field Editor to define a file name field and its default
values
.
The Default, User modify, and Required fields are not available
with all field types.
4
Click OK.
5
Repeat this procedure for each new file naming field.
6
Click Save, select or specify the profile name, and then click Save.
TABLE 5. File naming settings
Option
Description
Overwrite
always
Replaces an existing scanned document with the one the
connector is currently saving.
Return
error
Displays an error message prompting the user at the device
to change the file name.
Create
unique file
name
Adds a unique number to the file name, for example
“filename.1”, “filename.2”. The scanned document is
saved to the specified destination using a unique file name
and the existing document is not overwritten.
Quick Connect Admin Guide.book Page 17 Wednesday, March 26, 2008 3:45 PM