ECopy 3323B001 - imageFORMULA ScanFront 220e Administrator's Manual - Table 7. Field Types
20 | Installing and configuring the connector
Quick Connect uses the Field Editor and an Index Field Editor. The
following fields are available in the Field Editor and Index Field Editor for
Quick Connect:
TABLE 7. Field Types
Field Type
Description
Availability
Alphanumeric
Field size: The minimum and maximum
number of characters allowed.
Remember: The number of previous
entries to display when the user is
prompted for the naming information. If
set to zero, no previous values appear in
the drop-down list.
Both editors.
Batch Number
Length: The maximum number of digits
allowed for the batch number, including
leading zeroes.
Leading zeroes: Pads all values with
leading zeroes to make their length equal
to the maximum field size. For example, if
you specify "3" in the Length field and
you enable leading zeroes, batches are
numbered “001”, “002”, … , “010”,
“011”, … , “100”, “101”, … , “999”.
If you do not enable leading zeroes,
batches are numbered "1", "2", etc.
Field Editor
Database
The database location in which the list of
values for the field is stored.
Both editors.
Date
Format: The appropriate date format
according to local conventions.
Both editors.
Destination
Path
The path to the network location where
the document is stored.
Index Field
Editor
Device Name
No additional settings.
Both editors.
File Name
The name of the scanned file.
Index Field
Editor
Quick Connect Admin Guide.book Page 20 Wednesday, March 26, 2008 3:45 PM