ECopy 3323B001 - imageFORMULA ScanFront 220e Administrator's Manual - Preview And Authenticate
eCopy Connector for Quick Connect Administrator’s Guide | 37
3
Review the default scanner settings in the left pane; use the down
arrow button to view additional scanner options. To change a
setting, select the option, such as “Paper size” and then select the
setting on the toolbar that appears.
4
Press the connector button.
Preview and Authenticate
1
When the connector finishes scanning the document, review the
scanned images. If necessary, scan additional pages or re-scan any
of the original pages by placing the pages in the feeder and then
pressing Scan More.
2
To review and change the scanner settings, select the Scanner
Settings button on the Preview screen. The Scanner Settings...
screen appears. After changing the scanner settings, select OK.
3
To review and change the document settings, select the
Document Settings button on the Preview screen. After
changing the document settings, select OK.
4
When you are ready to store the document, press Next.
5
If the Logon screen appears, enter your user credentials, then
press Next.
Navigate
If you configure the connector to allow navigation, the Folder
Navigation screen appears. The list can display 200 entries at one time.
1
Select the target subfolder in the destination folder.
2
Select sub-levels in the list until the complete path appears in the
Path field at the top of the screen.
3
When you have selected the destination, press Next.
Quick Connect Admin Guide.book Page 37 Wednesday, March 26, 2008 3:45 PM