Summary of LaundryPure
Page 1
® o w n e r ’ s m a n u a l.
Page 2
G e n e r a l i n f o r m a t i o n contents general information . . . . . . . . . . . . . . . . . . . . . . . . . Use & safety considerations . . . . . . . . . . . . . . . . . . . 3 installation requirements . . . . . . . . . . . . . . . . . . . . . 4 cabinet features . . . . . . . . . . . . . . . ...
Page 3
3 • do not operate unit with cover removed . • disconnect all power before servicing . • do not use an extension cord or other adapter with this appliance . • this appliance is not recommended for use with high iron content water . If your water has a high iron content, consult a water filtration ex...
Page 4
4 10 volt 60 hz 15 amp fuse or circuit breaker . An individual branch circuit serving only the laundrypure unit is recommended . Laundrypure is equipped with a power cord . Never use an extension cord. Electrical ground is required on this appliance. For your personal safety, this appliance must be ...
Page 5
5 c a b i n e t f e a t u r e s power in service indicator power out water inlet water outlet bracket retainer calibration/reset button uv window bracket mounting clip mounting holes retainer clip 28.5” (723mm) 9.5” (241mm) 4.0” (101mm).
Page 6
6 b e f o r e y o u s t a r t remove your new laundrypure from its packaging . Inspect for any shipping damages . Unplug your washing machine . Remove the cold water hose from the cold water inlet on the back of your washing machine . Turn the cold water off by shutting off the cold water valve . To...
Page 7
7 i n s t a l l a t i o n level and fasten the laundrypure mounting bracket to a wall . Attach to wall studs using 1 1/4” screws . 0/7%2 3%26)#% 0/7%2 /54,%4 #/..%#4 ).,%4 $)3#/..%#4 mounting clip use the retaining screw to secure your laundrypure to the mounting bracket . On the backside of your la...
Page 8
8 c o n n e c t i n g p o w e r insert your washing machine plug into the power out cord located on the bottom of the laundrypure unit . Do not use an extension cord or adapter. Plug the opposite end of the provided power cord into the wall outlet of your home’s electrical power system . See page 4 ...
Page 9
9 calibration/reset button s y s t e m s e t u p turn on the cold water valve . Check all hoses to ensure no water is leaking . Tighten if necessary . Start your washer . The uv light should come on and you should see water begin to flow (when looking through the view window) . Note: your laundrypur...
Page 10
10 0/7%2 3%26)#% 0/7%2 /54,%4 #/..%#4 ).,%4 $)3#/..%#4 b e f o r e w a s h i n g c l o t h e s if your washing machine is not new you will need to perform this procedure to help remove any detergent buildup that may contaminate your clothing . Do not put clothes in the washer at this time . Set your...
Page 11
11 u s i n g y o u r l a u n d r y p u r e detergent and fabric softener you may choose to continue to use detergent and/or fabric softeners if desired . However, to completely experience all the benefits of your new laundrypure, we recommend washing using nothing but cold water, and if needed, ecoh...
Page 12
1 before performing maintenance please note: • do not remove cover until time for maintenance. • electrical shock hazard . Disconnect power before attempting installation or service . • electrical shock hazard . When working with electrical connections, the appliance and surrounding area should be c...
Page 13
13 r e m o v i n g t h e c o v e r turn off the cold water valve . 1 unplug the unit by removing the power cord from the power in socket on the laundrypure . 3 briefly turn washer to the “on” position . This will allow the water to drain from the laundrypure unit . Turn the washer off . 2 remove the...
Page 14
14 r e m o v i n g u v b u l b s remove cover (see page 13) then remove the uv shield by loosening the six (6) thumb nuts on the top and bottom edges . Pull the uv shield forward and away from the unit . The uv shield is attached to the unit with a tether . Do not remove, cut, or alter the tether or...
Page 15
15 i n s t a l l i n g u v b u l b s socket retainer grommet remove the new bulbs from their packaging . Line the bulb up with the retainer grommet . Push the bulb through the grommet while lining up the prongs with the socket as you insert . Once the bulb is inserted, line up the right end with the...
Page 16
16 disconnect the probe’s electrical connector by pressing the tabs to unlock, then pull straight out . Unscrew the silver ion probe and remove . Apply teflon tape to the threads of the new silver ion probe . Insert the silver ion probe into the pipe and tighten with a wrench . Do not overtighten. P...
Page 17
17 return the laundrypure cover to its original position, fitting the bottom in place and tipping upward . Secure with three (3) screws along the top edge . Put the three (3) remaining screws along the bottom edge and tighten . Return the power cord to the power in socket located on the bottom of th...
Page 18
18 f r e q u e n t l y a s k e d q u e s t i o n s does this laundrypure get out tough stains without pretreating? Tough stains will still require pretreatment . A sample packet of ecoh cleaner is included with your laundrypure . Ecoh is an excellent all natural pretreater for laundry, and is recomm...
Page 19
19 what will need to be replaced on the laundrypure? The two items that will have to be replaced are the uv bulbs that have a life of approximately ,000 loads and the silver ion probe which will have an expected life of up to one (1) year of normal residential use . There will be an indicator light ...
Page 20
0 1. The uv lights are on in the unit but there is no water flow/bubbles. Make sure your washing machine is set to the cold water setting. Make sure that your cold water is turned on at your supply valve. 2. No power. Check your electrical connections and make sure they’re all fully seated. 3. The u...
Page 21
1 name: ecoquest model: laundrypure manufacturer: ecoquest manufacturing this device complies with part 18 of the fcc rules . Responsible party ecoquest international 310 t . Elmer cox drive greeneville, tn 37743 ph: (800) 989-99 signature:___________________________ printed name: david g . Blackwel...
Page 22
I n s t a l l a t i o n n o t e s.
Page 23
3 i n s t a l l a t i o n n o t e s.
Page 24
® 65-00196-0908 lp_om_65-00196-0908 *p65-00196-0908*.