EcoQuest LaundryPure Owner's Manual - page 14
14
R E M O V I N G U V B U L B S
Remove Cover (see page 13) then
remove the UV shield by loosening the
six (6) thumb nuts on the top and
bottom edges .
Pull the UV shield forward and away
from the unit . the UV shield is
attached to the unit with a tether .
do
not reMove, cut, or aLter tHe
tetHer or tHe uv SHieLd.
Locate the UV bulbs . the LaundryPure unit
ships with zip tie straps to hold the UV bulbs
in place during shipment . Cut with a pair of
scissors or diagonal cutters to remove .
these do not need to be replaced .
After removing the ties, pull the right end of
the bulb toward you to remove from clip .
Remove the electrical socket by pulling
the bulb through its retainer grommet
while holding onto the socket . the bulb
will unplug .
After removing, dispose of UV bulbs in
accordance with local ordinances .
2
1
3
4
5
SOCKET RETAINER GROMMET
Electrical Shock Hazard .
Disconnect power before attempting
service . failure to follow these instructions
can result in death, fire, or electrical shock .
warninG:
for optimal performance, UV
bulbs (item #US70963) should be
replaced immediately if
nonfunctional, or every three
years .
TETHER
Do not operate LaundryPure with the UV shield or front cover
removed or improperly installed . failure to follow these instructions
can result in severe eye damage, death, or electrical shock .
danGer:
ZIP TIES