EcoWater ESM11+ Owner's Manual - (Cont)
Please Remember – Only use tablet or pellet salt in your softener!
17
Faceplate controller – features/options
(cont)
Primary Menu, continued
Water FlowRate: Enter Primary Menu. Press the ( ) or ( ) keypads until cursor is next to Water Flow Rate. Press
the SELECT/EXIT ( ) keypad. When selected,this screen will show the water flow rate in litres per minute (LPM)
or gallons per minute (GPM) with the moving bar graph at the bottom of the display.
Water Used Today: Enter Primary Menu. Press the ( ) or ( ) keypads until cursor is next to Water Used Today.
Press the SELECT/EXIT ( ) keypad and the litres/gallons used since midnight will be shown in the display.
Average Water Use: Enter Primary Menu. Press the ( ) or ( ) keypads until cursor is next to Average Water Use.
Press the SELECT/EXIT ( ) keypad and the average litres/gallons use each day will be shown in the display.
Soft Water Meter: Enter Primary Menu. Press the ( ) or ( ) keypads until cursor is next to Soft Water Meter.
Press the SELECT/EXIT ( ) keypad. This screen is similar to a trip odometer in that it will count the number of
litres/gallons through the system until it is reset. To reset back to zero press the ( ) keypad.
Set Rolling Screen: Enter Primary Menu. Press the ( ) or ( ) keypads until cursor is next to Set Rolling Screen.
Press the SELECT/EXIT ( ) keypad. This menu will disable the Normal Screen Views from scrolling and will show
only the screen that is most current.