Installation manual esm9+ / esm11+ / esm15+.
5 1 8 3 4 7 2 6 thank you thank you for choosing a water softener from ecowater. With over 80 years’ experience we have manufactured your new water softener from quality corrosion resistant materials to give you many years of trouble-free softened water. This manual will guide you through the steps ...
Identifying major parts of your water softener no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 quantity 1 pair 1 1 1 2 1 1 1 pair 2 2 1 1 2 2 2 part no. Go817 7208718 1103200 9003500 900431 800005 98124612 1205500 7170288 7255583 n/a b25, b39(2) 803186 803188 803187 description easy install tees* (incorpora...
Important: installation and safety information follow the installation instructions carefully. Failure to install the ecowater softener properly may void the warranty. Use care when handling the ecowater softener. Do not turn upside down, drop, or set on sharp protrusions. Before you begin installat...
Installation of your water softener planning and siting the installation the installation of a water softener is relatively easy, but we recommend that this work is undertaken by an authorised ecowater agent. Where possible the water softener should be sited close to the rising main, allowing for an...
Step by step guide to plumbing the softener plumbing turn off the water supply at the incoming main and begin plumbing as per the installation instructions on pages 5. Fit the bypass kit (if included) cut off the rising main and install the inlet tee with check valve. Next, plumb the bypass, inlet a...
Step by step guide to plumbing the softener (continued) please remember – only use tablet or pellet salt in your softener! Connect transformer 1. Connect the power cable leads to the two terminals on the transformer. Note: check to be sure all lead wire connections are secure on the back of the face...
Setting up your softener display left button up button right button e.A.S.E. Port select button down button language 1/6 english espagñol français systems units 2/6 english metric current time 3/6 15:45 please remember – only use tablet or pellet salt in your softener! Hardness 4/6 150 ppm begin by ...
Please remember – only use tablet or pellet salt in your softener! Checking salt and setting salt level 5/6 now is the time to add salt if not added and check your softener’s current salt level as follows: facing the softener, open the salt lid. To the left you will see a black vertical tube with a ...
Recharging the softener your softener recharge will currently be set to automatic. To set a recharge at the scheduled time 1. Press select button to enter the main menu. 2. Recharge is the first available option – press select button to select it. 3. Press down ( ) to highlight “schedule”. 4. Press ...
Troubleshooting if you are experiencing poor water flow, please check all plumbing first as it is extremely rare for a softener to cause flow rate problems. Checklist solution problem: hard water or intermittently hard water 1. Is the salt level above level 2? 1. Fill the cabinet with salt and 2 lit...
Ecowater systems mill road, stokenchurch, high wycombe, hp14 3tp t: 01494 48 48 48 e: info@ecowater.Co.Uk w: www.Ecowater.Co.Uk 400497 01/11.
