EcoWater ESM11+ Installation Manual - page 10
RECHARGING THE SOFTENER
Your softener recharge will currently be set to automatic.
To set a recharge at the scheduled time
1. Press SELECT
button to enter the Main Menu.
2. Recharge is the first available option – press SELECT
button
to select it.
3. Press DOWN ( ) to highlight “schedule”.
4. Press SELECT
button to confirm.
5. Press LEFT ( ) button twice to return to the rolling screen.
Please be aware hard water will be passed to service during
recharging, this is normal.
To set a recharge immediately (Recharge now)
1. Press SELECT
button to enter the Main Menu.
2. Recharge is the first available option – press SELECT
button
to select it.
3. Press DOWN ( ) to highlight “recharge now”.
4. Press SELECT
button to confirm.
The softener will automatically commence recharging.
5. Once the full recharge process is completed, the Main Menu will
reappear. Press LEFT ( ) button twice to return to the rolling screen.
Please be aware hard water will be passed to service during
recharging, this is normal.
Setting/changing recharge time
The softener’s default time for starting an automatic charge is 2:00am.
This is a good time for most households because water is not being
used. To change this time:
1. From any of the rolling status screens, Press the SELECT
button
to enter the Main Menu.
2. Press the down button to scroll through the menu options until “Basic
settings” is highlighted.
3. Press the SELECT
button to display the “Basic settings” menu.
4. Press the DOWN ( ) button to scroll through the menu options until
“Recharge time” is highlighted.
5. Press SELECT
button to display the “Recharge time” screen.
6. Press UP ( ) or DOWN ( ) buttons to change the recharge time in
one hour increments. To rapidly advance, hold the button down con-
tinuously.
7. Press the SELECT
button to confirm.
8. This returns you to the “Basic Settings” menu and if no other
adjustments are required, press LEFT ( ) button twice to return
to the rolling screen.
Please be aware hard water will be passed to service during
recharging, this is normal.
The following settings should always read:
Time format – 24 hour
Hardness units – PPM
Weight units – kilograms
SETTING/CHANGING TIME
1. From any of the rolling status screens, press the SELECT
button
to display the
Main menu.
2. Press the DOWN ( ) button to scroll through the menu options until
Basic settings is highlighted.
3. Press the SELECT
button to display the Basic settings menu.
4. Make sure
Current time is highlighted.
5. Press the SELECT
button to display the Current time screen.
6. Press the UP ( ) or DOWN ( ) buttons to change the time. Hold the
button down to rapidly advance.
7. Press the SELECT
button. The display will go back to the Basic
settings menu.
8. Press the LEFT ( ) button twice to return to the rolling status
screens.
Recharge
Salt settings
Basic settings
Main menu
Automatic
Recharge now
Schedule
Recharge
Recharge
Salt settings
Basic settings
Main menu
Current time
Hardness
Iron level
Basic settings
Current time
18.45
Please Remember – Only use tablet or pellet salt in your softener!
10
SETTING UP YOUR SOFTENER
(CONTINUED)