An iso 9001-2008 certified company ecr international, inc. 2201 dwyer avenue, utica ny 13501 web site: www.Ecrinternational.Com handheld infrared remote control 15 & 16 seer dc inverter single & multi-zone ductless split systems air handler (indoor) models - fwca, zwha & mwha [condenser (outdoor) mo...
1 2 2 5 6 7 7 8 11 12 12 13 handling the remote controller ................................... Remote controller specification................................... Features of remote controller buttons ....................... Indicators on display panel........................................... Auto ...
Keep the remote controller where its signals can reach the receiver of the indoor unit. (a distance of 8m is allowed). Location of the remote controller. 8m cautions the air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor ...
2 model transmission distance lowest voltage of cpu emitting signal rated voltage rg51i39/bgcefu, rg51i39/bgefu 8m 3.0v(dry batteries lr03 2) 2.0v performance features features of remote controller buttons 1. Operating mode: auto cool dry heat(cooling only model without) and fan . 2. Timer setting f...
3 temp button : push this button to decrease the indoor o o temperature setting in 1 f increments to 62 f note: heat mode is for cooling & heating models only. 1 temp button : push this button to increase the indoor o o temperature setting in 1 f increments to 86 f. 2 mode button: each time the butt...
4 buttons design might be slightly different from the actual one you purchased depending on individual models. All the functions described are accomplished by the indoor unit. If the indoor unit has no this feature, there is no corresponding operation happened when press the relative button on the r...
Timer on off set temperature transmission indicator temp./timer display fan speed display mode display on/off display this transmission indicator will light when remote controller transmits signals to the indoor unit. Displays the current selected mode. Including auto, cool, dry, heat (cooling & hea...
Ensure the unit is plugged in and power is available. The operation indicator on the display window of the indoor unit illuminates. 1. Use the mode button to select auto. 2. Push the temp button to set the desired temperature within a range of o o 62 f ~ 86 f. 3. Push the on/off button to start the ...
Ensure unit is plugged and power is available. 1. Press the mode button to select cool, heat (cooling & heating models only), or fan mode. 2. Push the temp button to set the desired temperature within a range of o o 62 f ~ 86 f. 3. Push the fan speed to select the fan mode of auto, high,med or low. ...
To press the timer on button can set the auto-on time of the unit. To press the timer off button can set the auto-off time of the unit. 1. Press the timer on button. The remote controller shows timer on, the last auto-on setting time and the signal "h" will be shown on the lcd display area. Now it i...
The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24. Caution ! Example of time...
10 timer off stop on set 10 hours later (auto-off operation) the timer off feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. To stop the air conditioner in 10 hours. 1. Press the timer off button, the ...
11 example: timer on timer off (off start stop operation) this feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. To start the air conditioner 2 hours after setting, and stop it 5 hours after setting. 1. Press the timer on button. 2...
1 1. When you press the recessed lock button, all current settings are locked in and remote controller does not accept any operation except that of the lock. Use the lock mode when you want to pre- vent settings from being changed accidentally. Press the lock button again when you want to cancel the...
13 cautions 1. When replacing batteries, do not use old batteries or different type batteries. Otherwise it may cause the remote controller to malfunction. 2. If you do not use the remote controller for a few weeks or more, remove the batteries. Otherwise, battery leakage may damage the remote contr...
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details..
