ECR International Enviroair Installation, operation and maintenance manual - page 12
10
TIMER OFF
Stop
On
Set 10 hours later
(Auto-off Operation)
The TIMER OFF feature is useful when
you want the unit to turn off automatically
after you go to bed. The air conditioner
will stop automatically at the set time.
To stop the air conditioner in 10 hours.
1. Press the TIMER OFF button, the last
setting of stopping operation time and
the signal "h" will show on the display
area.
2. Press the TIMER OFF button to display
"10h" on the TIMER OFF display of
the remote controller.
3. Wait for about 3 seconds and the digital
display area will show the temperature
again. Now this function is activated.
TIMER OFF
Example:
h
TIMER ON OFF
h
On
Stop
2 hours later
after setting
Set
To stop the air conditioner 2 hours after
setting and start it again 10 hours after
setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to
display 2.0h on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to
display 10h on the TIMER ON display .
5. Wait for the remote control to display
the setting temperature.
TIMER OFF
TIMER ON
(On
Stop
Start operation)
This feature is useful when you want to
stop the air conditioner after you go to bed,
and start it again in the morning when you
wake up or when you return home.
Example:
COMBINED TIMER
(Setting both ON and OFF timers
simultaneously)
Start
10 hours later
after setting