ECR International Enviroair Installation, operation and maintenance manual - page 6
4
Buttons design might be slightly different from the actual
one you purchased depending on individual models.
All the functions described are accomplished by the indoor
unit. If the indoor unit has no this feature, there is no
corresponding operation happened when press the relative
button on the remote controller.
Note:
TIMER OFF Button:
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10h, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-off time
to 0.0
12
LOCK Button:
When you press the recessed LOCK button, all
current settings are locked in and the remote controller does not
accept any operation except that of the LOCK. Press again to
cancel the LOCK mode.
13
TURBO Button:
Push this button on COOL mode, the air con-
ditioner goes into powerful cooling operation. Push again to
cancel the TURBO function(Not availabe for the air conditioner
without TURBO function).
14
Press this button to go into the Energy-Saving
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
11
NOTE:
While the unit is running under
tion
mode, it would be canceled if you press the MODE,FAN
SPEED or ON/OFF button.
ECONOMY
ECONOMY Button:
opera