Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 1 emotimo spectrum instructions firmware b003.
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 2 hardware: 1) mounting: mount camera to arca-type clamp illustrated above. You will need to have an arca-type l-plate mounted to your camera (this is not included by default with spectrum orders). If you do not already have one, we o...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 3 2) ports: 3) power: 12-24v. Minimum 2a. 3.5a preferred. Connector: 2.1mm x 5.5mm x 12mm circular barrel connector – center positive..
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 4 4) controller: 5) connection – easiest way to connect. A. With remote off (no flashing or lights on), press and hold the share button with your left thumb, and then press and hold the ps button (middle) with your right thumb. When l...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 5 phones / cameras) to the ps4 and then usb end to a computer. Look for an orange glow on the back of the ps4 while it is charging. Once this turns off it is fully charged. Watch out! Many field packs with usb ports will not charge th...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 6 applications: general firmware navigation:.
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 7 real time moves: power on the unit and select the first menu setting (live motion). Now you are on a motor presets page that allows you to drive the head around and experiment with some predefined motor move profiles. On this page, ...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 8 camera triggering from remote using right trigger (r2), a half press is focus, and a full press is shutter/focus to trigger your camera to shoot. This functionality is for fun or for hot head camera still shooting. This triggering i...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 9 presets – goto positions: there are four goto presets you can program. To set, scroll over to the goto positions pages. Do this from the main menu by selecting the top menu ( live motion ) and then pressing the right dpad button or ...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 10 record and playback screen: record and playback mode allows you to record a move live and have the spectrum play / repeat that move back to you over again. To set record and playback, start by selecting the top menu ( live motion )...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 11 programmed moves: setup is 2-point sms or 2 point video: use the up and down d-pad on the remote or the 8 ways switch to navigate through the setup screens, there are 4 of them. Center button on the spectrum navigation joystick is ...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 12 shot, the spectrum will calculate how long your shot will take to complete in real time at the bottom of the screen. 7. Duration (video): in seconds, select how long you would like your move to take. 8. Preroll (video): this is the...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 13 14. Summary/ review page: if you are happy with your settings, then get to the last screen and hit the center button (or x on controller). It will go to start, and then tap it again to shoot. While shooting, pressing x on the remot...
Emotimo spectrum instructions b003 - copyright © 2016 emotimo llc 14 soft stops: to avoid crashes, you can setup soft stops: 1) go all the way left on the track, left on pan, down on tilt to the limit you want – hit the l1 button (button above left trigger – l2) 2) go all the way right on the track,...
