EMotimo spectrum ST4 Instructions Manual - page 10
eMotimo spectrum Instructions B003
- Copyright © 2016 eMotimo LLC
10
Record and Playback screen:
Record and Playback mode allows you to record a move live and have the spectrum play
/ repeat that move back to you over again. To set Record and Playback, start by
selecting the top menu (
Live Motion
) and then pressing the right DPad button or right on
the Navagation joystick until you see the Rec and Playback heading.
1. Use triangle to set the feel of your move. Use the DPad up and down to select
Record.
2. Press X on the remote to start the recording
3. You have 10 seconds of time to record your move. The capture rate is 50Hz with
500 keyframes.
4. Move the head any way you want with live controls*
5. When the Record function is finished you will be able to use the Dpad or
Navigation joystick to move down to Play.
6. When you hit the Play button by pressing X, the unit will return to start**, pause for
1 second and then replay the move.
Known Issues for REC/Play;
• *There currently is no visual indicator that the head is recording or that it has
stopped. Recording is finished when cursor is active
• **The return to start is hardcoded to take only 3.0 second with 0.5 second
ramp. If you create a long on a long slider, this will exceed speed limits and
the unit will stall.
• You cannot save these moves
• You cannot record less or more that the preset amount.
• Clear and Return to start menu options are not active.