EMotimo spectrum ST4 Instructions Manual - page 4
eMotimo spectrum Instructions B003
- Copyright © 2016 eMotimo LLC
4
4) Controller:
5) Connection – easiest way to connect.
a. With remote off (no flashing or lights on), press and hold the share button
with your left thumb, and then press and hold the PS button (middle) with
your right thumb. When LED of the remote flashes white with quick blinks,
let both buttons go.
b. Power on the spectrum, wait 3 seconds and then press the spectrum’s
center button of the navigation joystick (you will feel a click a you press in).
The remote’s LED should turn light blue in a couple seconds.
c. If you want to see this process in action, watch instructional video here:
https://vimeo.com/159236220
6) Charging Remote – make sure your remote is fully charged before you head out
into the field. Plug in a micro USB cable (not included, but typical of many