Eyevis eyeLCD-4600-LE-700 User Manual - page 29
of
82
EYE-LCD-4600/5500-LE-700
29
Operating The Monitor
Setup Process
Step 1. Plug in the power cable and turn on the AC power switch (without
turning on the signal source device(s)).
“ I “ is power on
“O” is power off
Step 2. Plug in the signal source cables.
Step 3. Then press the power key on the keypad of the monitor or the power
key on the remote control to turn on the monitor.
Step 4. Turn on the power of the signal source device(s) to begin sending
signal to the monitor.