Eyevis eyeLCD-4600-LE-700 User Manual - page 45
EYE-LCD-4600/5500-LE-700
45
Advanced Settings Menu
This menu is used for adjusting advanced settings.
A
dv
anc
ed S
ettings
Auto Adjustment
Forces the monitor to reacquire and lock to the input signal. This is useful
when the signal quality is marginal. Note: This feature does not continually
reacquire the signal. Options: No, Yes (Default: No)
Image Position
Adjusts the image location (Only VGA Mode). Press
◄ or ►, select the
desired option, and then press ENTER. Options: Up, Down, Left, Right
Phase
Phase improves focus, clarity and image stability (Only VGA Mode).
Press
◄ or ►, select the desired level, and then press ENTER. Range: 0~63
Clocks
The image is wider or narrower by increasing or decreasing this setting. (Only
VGA Mode). Press
◄ or ►, select the desired level, and then press ENTER.
Range: 0~100
VGA ADC Settings
Selects the ADC setting, User ADC Calibration, and restore factory default
ADC setting. Options: Default, User Default: Default
Flesh Tone
Options: Off, Low, Medium and High (Only Video Mode) Default: Off
IRFM
Creates slight frame motion to help reducing the risk of image retention.
Press
◄ or ►, select the desired option, and then press ENTER. Options: On
(Default: Off )
Baud Rate
Sets the Baud rate. Press
◄ or ►, select the desired level, and then press
ENTER. Options: 115200, 38400, 19200, 9600 (Default: 115200)
Smart light
control
Selects the smart light control mode.
Press
◄ or ►, select the desired option, and then press ENTER.
Options: Off, DCR , Light Sensor
Default: Off
Wake Up From
Sleep
Selects the weak up from sleep mode.
Press
◄ or ►, select the desired option, and then press ENTER.
Options: VGA Only / VGA,Digital,RS232 / Never Sleep
Default: VGA Only
Ethernet Setup
►
Network Setup Please see next page for more information
Factory Reset
Restores all settings to their default. Options: No, Yes (Default: No)