Eyevis eyeLCD-4600-LE-700 User Manual - page 49
EYE-LCD-4600/5500-LE-700
49
Wake Up from Sleep (WOD)
By default, the display will enter power saving (Sleep Mode) if no signal is
received for 5 minutes.
Normally, the RS-232, DisplayPort, HDMI and DVI inputs are inactive in Sleep
Mode, to save power.
To change the behavior of Sleep Mode, change the “Wake up from Sleep”
setting in the “Advanced” menu.
1. VGA Only (default) – The RS-232, DisplayPort, HDMI and DVI inputs are
inactive when the display is in sleep mode. The display will wake up when
it receives a signal at the VGA input.
2. VGA, Digital, RS232 – The RS-232, DisplayPort, HDMI and DVI inputs stay
active when the display is in sleep mode. The display will wake up when it
receives a signal at the VGA, DisplayPort, HDMI, or DVI input.
3. Never Sleep – The display will never enter Sleep Mode.
Default Settings
Item
Default
Power switch
Off
Scheme
User
Brightness
50
Sharpness
12
Back light
80
Contrast
50
Color Temp.
9300K
Source Auto Detection
Off
OSD Language
English
Auto
Off
Wake Up from Sleep
VGA only
OSD Rotation
Landscape
Smart light control
Off
IRFM
Off
Baud rate
115200