Eyevis eyeLCD-4600-LE-700 User Manual - page 47
EYE-LCD-4600/5500-LE-700
47
Advanced Settings Menu (Video Wall Setup: option)
This menu is used for adjusting video wall settings.
A
dv
anc
ed S
ettings
Video W
all
Setup
Monitor ID
Sets the Monitor ID from 1 to 25
Press
◄ or ► to set the monitor ID and then press ENTER.
Options: 1~25
Video Wall
Enables or disable video wall function - setup the one image across
multiple displays.
Press
◄ or ► to switch ON/OFF and then press ENTER.
Options: On, Off
DVI Indemnity
Enables or disables the DVI Indemnity
For large Matrix walls that have a single digital source and DVI pass-thru
cables. Turning DVI Indemnity may enhance the video quality and
reliability of pass-thru signals.
Press
◄ or ► to switch ON/OFF and then press ENTER
Options: On, Off
Power On Delay
Sets the power on delay schedule, then all display will not turn on at
once.
Press
◄ or ►to select the desired value and then press ENTER.
Options: 0~1.50 (in .05 second increments)
Frame
Enables or disables the frame compensation.
Press
◄ or ► to switch ON/OFF and then press ENTER
Options: On, Off
Matrix X
Sets the number of displays used in the horizontal position
Press
◄ or ►to select the desired value and then press ENTER.
Option: 1~5
Matrix Y
Sets the number of displays used in the vertical position
Press
◄ or ►to select the desired value and then press ENTER.
Option: 1~5
Division X
Sets the horizontal position of the display wall matrix.
Press
◄ or ►to select the desired value and then press ENTER.
Option: 1~5
Division Y
Sets the vertical position of the display wall matrix.
Press
◄ or ►to select the desired value and then press ENTER.
Option: 1~5