EYEZONE B1080PX-3 User Manual - page 4
5
Press the “SETUP” button on remote control to directly open the settings screen. (If there is
file that is being play, please stop first.)
There are three groups of sub-menu in the main menu (“Audio Setup”, “Video Setup” and
“Other Setup”).
In the settings screen, you can use the “▲、▼、 ▲ 、 ▼ ” buttons to select an item, and press
the “ENTER” button to confirm the selection.
Press the “SETUP” button on remote control to save and quit the settings screen.
7.1 AUDIO SETUP
SPDIF Out:Select “Analog/DPCM” when you connect the audio with a stereo RCA cable
(the RED and WHITE cable).
Speakers Out:Select the channel quantity of the speakers out. (B1080i-3 only supports 2
channels)
7. SETTING UP
6
7.2 VIDEO SETUP
NTSC Active Output:Select the output mode. (SD Video/ HD Y.Pb.Pr/ VGA)
You can also press directly the “TV MODE” button on the remote
control to select output mode.
SD Video:Select the SD output mode. (“Video/ S-Video” or “Y.Cb.Cr”)
HD Y.Pb.Pr 60Hz:Select the Y.Pb.Pr output resolution among 480p / 720p / 1080i.
VGA 60Hz:Select the VGA output resolution.
(640*480 / 800*600/ 1024*768/ 1280*1024)
7.3 OTHER SETUP
TV Standard:Select the output TV video format (NTSC / PAL).
Aspecl-ratio:Select TV mode 4:3 or 16:9.
Play OSD Display:Enable or disable the OSD display.
Auto Play:Enable or disable the auto play function. (the B1080i-3 will auto play the movie
files on the CF after power on)