EYEZONE B1080PX-3 User Manual - page 7
11
8.5 RS-232 FUNCTION (RS-232 cable is optional)
Use the tool “Hyper Terminal” or other tools to control the B1080i-3 with ASCII command.
NOTE. 1.Baud Rates:
- Firmware Updating: Set up the baud rate as “115200”.
- ASCII Command: The available baud rates is 38400.
2. The reaction time of B1080i-3 is around three seconds.
Keyboard Layout
q:POWER -:VOL -
w:SLOW
R:RETURN *:MUTE >:NEXT
!:REPEAT S:SELECT :PREW
~:SETUP A:Auto Download
u:UP
#:TV MODE
p:PLAY d:DOWN
%:AutoPlay P:PAUSE/STEP l:LEFT
i:INFO x:STOP r:RIGHT
m:NTSC/PAL f:FFW s:ENTER
$:SEARCH b:REW C:CLEAR
+:VOL +
(XXXXX.XXX):Play The File (xxxxx.xxx is the file name)
NOTE:Must include the round brackets.
[number]: Play the file by index. (numbers
Pin Assignment
D Sub 9Pin Female
D Sub 9Pin Female
Pin 1
Pin 4
Pin 2
Pin 3
Pin 3
Pin 2
Pin 4
Pin 1
Pin 5
Pin 5
Pin 6
Pin 6
Pin 7
Pin 8
Pin 8
Pin 7
Pin 9
Pin 9
12
Situation Check
Point
No Picture
1. Check power cable and power switches.
2. Ensure the video cables are connected between the
player and the B1080i-3.
3. Press the “TV MODE” button on the remote control
to select the correct output mode.
4. Make sure the file format on the CF card is correct.
5. Check if the display device is switched to correct
video input source.
No Response From
the Remote Control
1. Ensure that there are 2 batteries (AAA size) in the
remote control and they are inserted the correctly.
2. Check for any barrier between the remote control
and the product.
No sound
1. Check if the mute function is on.
2. Check if the volume is set properly.
3. Check if audio cable has been connected correctly.
9. TROUBLESHOOTING