Ezon SHS-7020 User manual - Basic Functions

14

Basic Functions 

This section describes the ways to initialize the information registered in the doorlock, to 

register the password and card data, and to open or close the door. 

Opening the Door from Outside with a 

Password or a Card

1. Pressing the [Wake Up] Button

The keypad is lighted 

when the [Wake Up] button 

is pressed. 

2. Entering the Password or Contacting the Card

Press the [¿] button after 

entering the password or 

place the card.

or

Successful: "Too~~t

”  

Failed: "Toot~"  

- Password entry or card contact is validated only when the keypad is lighted. If it is lighted 

off, press the [Wake Up] button first. 

- To cancel the password entry, press the [#] button and start again. 

- When an invalid password entry or unregistered card contact is attempted for 5 times in a 

row, the beep warning is sounded 20 times and the doorlock becomes inactive for 3 

minutes. The 

“toot” sound is activated every 10 seconds while the unit is inactive, and 

then the 

“toot~ toot~ toot~ toot~ toot~” sound is activated before the unit becomes 

operational again.