Contents: 1. Safety 2. Specifications 3. Control panel 4. Treadmill components 5. Assembly 6. Adjusting & testing 7. Operating instructions 8. Important notes 9. System connection diagram 10. Maintenance 11. Running belt adjustment 12. Troubleshooting ezygym.Com.Au phone: 1300 ezy gym (1300 399 496)...
1 - safety attention: carefully read this manual before using the machine. ·the treadmill is for indoor use only. Keep it free from moisture and splashes of water. Don’t put anything onto the machine. ·keep the machine away from combustibles and flammables. ·make sure that the four feet of the tread...
2 - specifications • input voltage: 220v + 10% (50hz or 60hz) • environment temperature for working: 0-40°c. • maximum input power: 1.5 hp electric current is less than 5a. • speed: 1.0 – 12.0 kilometers/hour (±5%) • time limits: 00:00 - 99:99 (minute: second) • distance: 0.00 - 9.99 kilometers. • u...
3 - control panel - fit 100 (type a) time display speed display preset selector reset speed up distance pulse sensor display calorie display set manual preset on/off slow down hand held pulse sensor safety key socket for pulse sensor.
3 - control panel - fit 100 (type b) time display speed display preset selector reset speed up distance pulse sensor display calorie display set manual preset on/off slow down hand held pulse sensor safety key socket for pulse sensor.
4 – treadmill components control panel handlebars columns motor cover bottom frame foldaway air spring running belt rolling wheels back frame cover manual incline adjustor adjusting screw for running belt fit 100 assist: extended long handle & switch option the start / stop switch function is duplic...
5 – assembly 6 - adjusting and testing 1. Put safety key onto control panel. 2. Please check the running belt moves smoothly and with no noise. 3. Plug in & turn on power outlet: control panel should display “0” & the running belt is still. 4. Press the “on/off” button, the treadmill should start ru...
7 - operating instructions 1. Insert plug into power outlet. 2. Insert emergency stop “safety key” onto the “safety key” position of control panel. 3. Stand on the plastic side boards beside the running belt with hands holding the handlebars, and then start the machine by pressing start/stop button....
8 – important notes 1. When using the treadmill for the first time, please begin with a slow speed, and raise the speed gradually. 2. The strides should suit the speed of belt. Don’t over stride. 3. Don’t use the safety key as a stop button; otherwise the treadmill may be damaged. Only in case of em...
10 - maintenance 1. Cleaning: the treadmill should be kept clean, preferably with a cover over the belt & motor cover. Pull the plug out first before cleaning. Clean it every one to two months. When cleaning, open the cover, clean the dust from motor and sensor and then check if the screws are loose...
12 – troubleshooting problems possible reason check panel displays nothing when switched on 1.Plug & socket aren’t well connected 2.Panel is not connected properly 3.Fuse is damaged 1.Reinsert plug 2.Reconnect panel 3.Replace the fuse the running belt stops while panel working normally the machine’s...
