FAAC 424 D LS Instructions For Use Manual - English
12
ENGLISH
CE DECLARATION OF CONFORMITY
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol
indicates notes that are important for the safety of persons and for the good condition of the
automated system.
The symbol
draws your attention to the notes on the characteristics and operation of the product.
Manufacturer:
FAAC S.p.A.
Address
:
Via Benini, 1 - 40069 - Zola Predosa - Bologna - ITALY
Declares that:
Control unit mod.
424 D LS
• conforms to the essential safety requirements of the following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Additional information:
This product underwent a test in a typical uniform configuration (all products manufactured by FAAC S.p.A.).
Bologna, 10-01-2007
Managing Director
A. Bassi
INDEX
1. GENERAL CHARACTERISTICS
page.13
2. TECHNICAL SPECIFICATIONS
page.13
3. PRELIMINARY SETTING-UP
page.13
4. CONNECTIONS AND OPERATION
page.14
4.1. TERMINAL BOARD CN1
page.14
4.2. TERMINAL BOARD CN2
page.14
4.3. TERMINAL BOARD CN3
page.15
4.4. TERMINAL BOARD CN4
page.15
5. INSTALLING THE RADIO CONTROL RECEIVER BOARD
page.16
6. OPERATION WITH ENCODER OR AMPEROMETRIC OPERATION
page.16
7. CONTROL LEDS
page.16
8. OPERATION OF DISPLAY
page.16
9. ADJUSTING THE OPERATING PARAMETERS
page.17
10. PROGRAMMING
page.18
11. OPERATION OF ELECTRONIC CLUTCH
page.18
12. PROTECTION FUSES
page.19
13. CONNECTION LAY-OUT
page.19
14. FUNCTION LOGICS
page.20
15. HOW TO SECURE THE BOARD
page.22