1. DL manuals
  2. Fairbanks
  3. Scales
  4. 27707
  5. Operator's Manual

Fairbanks 27707 Operator's Manual

Manual is about: TeleWeigh Wired

Summary of 27707

  • Page 1

    Presented by dallas houston austin ft worth nicolscales.Com 800.225.8181 contact us nicol scales & measurement is an iso accredited calibration company that has provided calibration, repair and sales of all types of weighing and measurement products since 1931..

  • Page 2: 51164

    2007 by fairbanks scales, inc. 51164 all rights reserved revision 1 09/07 teleweigh wired model: 27707 operators manual.

  • Page 4

    09/07 3 51164 rev. 1 amendment record teleweigh wired document 51164 manufactured by fairbanks scales inc. 821 locust kansas city, missouri 64106 created 01/2007 revision 0 06/2007 preliminary release revision 1 09/2007 document release.

  • Page 5

    09/07 4 51164 rev. 1 disclaimer every effort has been made to provide complete and accurate information in this manual. However, although this manual may include a specifically identified warranty notice for the product, fairbanks scales makes no representations or warranties with respect to the con...

  • Page 6

    09/07 5 51164 rev. 1 table of contents section 1: general information .................................................................. 6 scale description................................................................................................................. 6 scale specifications ..........

  • Page 7

    09/07 6 51164 rev. 1 section 1: general information scale description fairbanks scales teleweigh ™ health scale is designed for weighing people and communicating that information to a variety of devices, via rs232 communications. The scale has its own calibration parameters and a display for showing...

  • Page 8

    Section 1: general information 09/07 7 51164 rev. 1 scale specifications operating environment • home, office, light industrial dimensions • 14” x 14” x 2” weight capacity • 500 lbs / 226.8 kg overall weight • less than 10 lbs. Without batteries power • 6vdc (4 aa alkaline) • 12vdc via rs232 cable •...

  • Page 9: Standard Approvals

    Section 1: general information 09/07 8 51164 rev. 1 scale specifications continued calibration switch • momentary switch places the scale into the calibration mode smart switch • integrated on switch • the scale will turn off when a predetermined time length expires. Load cell interface • utilizes (...

  • Page 10

    09/07 9 51164 rev. 1 section 2: installation unpacking and setup 1. Remove the scale from the packing box. 2. On the bottom-side of the scale, move the switch to the appropriate setting. − lb ( pounds ) is used for standard english weighments. − kg ( kilogram ) is used for metric weighments. − bt ( ...

  • Page 11

    09/07 10 51164 rev. 1 section 3: operations manual zero operation the scale may need to be manually zeroed occasionally. The following procedure will perform a manual zero of the scale. 1. While the display is still active (thirty seconds), press the zero button . Using an item such as a straightene...

  • Page 12

    Section 3: operations 09/07 11 51164 rev. 1 modes of operation the two basic modes of operation are stand alone weighing operations, and weighing with bidirectional telecommunications. Stand alone weighing operations stand alone weighing operations occur when the mode switch is in the lb or kg posit...

  • Page 13

    Section 3: operations 09/07 12 51164 rev. 1 weighing with bidirectional telecommunications upon power-up, the scale transmits an enq 05hex character through the rs232 port, which allows a connected rs232 device to customize the scale. − the connected device that handles the data is usually a compute...

  • Page 14: Response Table

    Section 3: operations 09/07 13 51164 rev. 1 inquiry cycle 1. Upon a successful power up sequence, the scale will transmit an enq 05hex out of the rs232 port. 2. The scale will then wait five (5) seconds for a response. 3. If a response is returned, it will be acted upon per the response table below....

  • Page 15: Rules For Responses

    Section 3: operations 09/07 14 51164 rev. 1 inquiry cycle, continued rules for responses • if a response is received, it will be processed and no weight will be transmitted (unless it is a cr and mode is tp). • one response will be processed at a time. • responses may be received in any transmission...

  • Page 16: Installing Batteries

    09/07 15 51164 rev. 1 section 4: service & maintenance scale maintenance installing batteries 1. To install the four (4) aa batteries, lift the compartment lid. 2. Match the correct poles and insert two batteries in one direction, then two in the other direction. 3. Replace the battery cover. Findin...

  • Page 17: Scale Error Codes

    Section 4: service & maintenance 09/07 16 51164 rev. 1 external connections 1. Plug display interface cable into the scale base where marked. 2. Plug the rs 232 interface cable into the computer, if required. Internal connection • rj45 8-pin connector • pcb j6 wiring wire output 1 rx 2 tx 3 +12vdc 4...

  • Page 18: Lcd Display Indications

    Section 4: service & maintenance 09/07 17 51164 rev. 1 lcd display indications displayed text or enunciator description the scale is initializing its hardware all lcd segments on hardware test to check for a malfunctioning display. Scale battery requires changing motion/stable annunciator weight is ...

  • Page 21

    Manufactured by fairbanks scales, inc. 821 locust kansas city, missouri 64106 www.Fairbanks.Com teleweigh wired operator manual document 51164.