Fairbanks 27707 Operator's Manual - Lcd Display Indications
Section 4: Service & Maintenance
09/07
17
51164 Rev. 1
LCD Display Indications
Displayed Text or Enunciator
Description
The scale is initializing its hardware
All LCD Segments ON
Hardware test to check for a malfunctioning display.
Scale battery requires changing
Motion/Stable Annunciator
Weight is stable on the scale
Lb Annunciator
Displayed weight is in pounds
Kg Annunciator
Displayed weight is in kilograms
Weight Under Capacity
Weight Over Capacity
Calibration sequence successful
Error in Calibration sequence
Audible Beep errors/Signals
Number of
Beeps
Display message
Description
1
or
Scale is ready for the weighment.
2
Weight value and “stable”
indicator on
Weight measurement is stable and captured.
7
Short chirps at 5 second intervals for 30 seconds.
Weight is left on scale, and
On
switch contact closed.
Load left on Scale Error
To preserve battery life, the
Load Left On Scale
error operation is implemented.
•
This happens when the scale is turned on due to weight placement on the scale.
•
The scale executes either Stand Alone Weighing or weighing the Bidirectional
Telecommunications Cycle.
•
After completion of either cycle, if a load is still sensed on the scale, it signals an
alarm by chirping (short beeps) every five (5) seconds for a duration of thirty
(30) seconds.
•
This alarms users that there is weight on the scale, compromising the battery’s
life.