FANATEC Forza Motorsport CSR Wheel Manual - 5. Installation
of
29
5. Installation
5.1 Shifter
1.
Make sure that the tube fixation screws are lose. To avoid scratching
use a coin and not a screwdriver.
2.
Insert the metal tubes into the base from the left or right side. The tube
has to be fully inserted until it comes out of the base on the other side.
3.
To build up some counterforce use a flat underground and place the
wheel vertical on the tubes. Then push the wheel down with soft pres-
sure.
4.
Tighten the tube fixation screws with a coin.
5.
Choose either the sequential or the 6-speed gear stick and attach it to
the tubes