FANATEC Forza Motorsport CSR Wheel Manual - 6. Getting Started
Xbox 360 Mode
The Forza Motorsport CSR wheel communicates wirelessly with the Xbox 360
and does not need a cable or dongle.
1.
Power on both devices.
2.
After self calibration press and hold Xbox 360 Guide Button for one second
or press and hold Start Button for one second.
3.
The Xbox 360 Guide Button will illuminate the controller slot you are con-
nected to.
If you use the wheel for the first time, the CSR must be connected to the Xbox
360 like any other wireless controller.
1.
Press Connect Button on your console (ring of light starts blinking)
2.
Press and hold Connect Button on wheel the for about one second (ring of
light on wheel stops blinking and shows the same illuminated segment)
3.
CSR and console are connected
PC Mode
1.
Installation of drivers
For PC use, you need to install the driver before you plug in the USB cable.
The driver requires less than 10 MB of space on your hard disk and is compat-
ible to Windows XP (SP2+) and Windows Vista/7/8 (32-Bit/64-Bit). Please
check www.FANATEC.com/support for the latest updates on the driver.
2.
Connect the USB cable to a free USB slot of your PC and
to the connector on the left side of the wheel.
3.
Power on the wheel.
4.
After self calibration press the Back Button and hold it
for one second. "- - -" will disappear on the display.
5.
PC and CSR are connected.
Driver
To open the driver dialog you have to go to the control panel, double click
"Game Controllers" and choose the properties of "Fanatec CSR Wheel". In this
window you can change the functionality of the wheel and test the buttons.
PS3 Mode
1.
Connect the USB cable to a free USB slot of your Playstation 3 and to the
connector on the left side of the wheel.
2.
After the self calibration enter the PC mode by pressing Back Button for
one second. "- - -" will disappear on the display
3.
Press Connect Button + Back Button simultaneously. A dot in the display
indicates the PS3 mode.
4.
Playstation 3 and CSR are connected.
IMPORTANT:
Please note that on some Playstation 3 games it is required to use the SIXAXIS
controller for Navigation in the games menu. After starting a game, the
wheel could return to PC mode – re-enter PS3 mode.
6. Getting started
6.1 Select platform mode