FANATEC Forza Motorsport CSR Wheel Manual - 6. Getting Started

6. Getting started

6.2 Tuning [cont.]

Wheel Centering

1. Boot the wheel into PC mode (see page 21) and then turn it to its center posi-

tion 

2. Press and hold lower red button button at the same time.

3. Press Xbox Guide Button.

4. Release all three buttons.

5. Wheel's center position will now be reset

Linearity Setting (LIN)

In steps of 10 from 0 to 100%

If you like to have the precision around the center of a large 

steering angle (e.g. 900°) but the advantage of fast move-

ments of a short angle (e.g.) 180° you can change the linearity 

of the steering axis. The car will react slowly around the 

center and make larger movements the more you turn the 

wheel.

Dead Zone Setting (DEA)

In steps of 10 from 0 to 100

For some games you may want to add a little dead zone, 

where the car does not react to wheel movements in the 

center. Some games may require this in order to avoid shak-

ing on the straights. 

Spring Setting (SPR)

In steps of 1 from -3 to +3

This setting changes the spring forces sent from the game 

and determines how strong the wheel returns to the center. 

Can only be used while using the wheel with consoles.

Damper Setting (DPR)

In steps of 1 from -3 to +3

This changes the dampening effect sent by the games. The 

damper lets the wheel move slower. The more damper the 

more resistance you can feel. Can only be used while using 

the wheel with consoles

6.3 Calibration

Lin

000

010

100

dEA

000

050

SPr

 -2

  3

0Pr

 -2

  3